Back to Washing Machines

Cabinet Washing Machines

CMM Cabinet Wash

Designed initially for washing complex components prior to CMM Inspection this machine can also be utilised for low volume high quality production (cycle time 6-8 mins), and can be configured to accept a variety of components. Featuring, Spray, Flood-Cavitation and Pin Point Washing with Vacuum Drying, components can be washed to a very high specification and with developed programming can be released at ambient temperature within predictable and repeatable limits.

Designed for high specification low volume production washing of single components, or higher volume general washing of multiple components (bolts, discs etc). This machine has the option of vertical or hinged access doors together with fixture rotation in the horizontal or vertical axis for maximum coverage. With hinged door configuration this machine can also provide agitated flood washing for the best results in its class.

SWASH Cabinet Wash #2 Cabinet Wash

Derived as a Hybrid of the Swash and the CMM Cabinet Wash, this machine provides Fixed, Rotary or Roll component washing. With a capacity of up to 500kg and an envelope of nearly 800mm cube this simple and cost effective wash can be utilised as an Off-Line or Full Production facility. Single or Dual Hinged Doors can be provided as standard or as shown, a Powered Vertical door can facilitate auto-loading in a production mode.

Dunnage-Separator Wash

With large access doors and reciprocating Wash and Drying Manifolds and 2 tailored rack systems for loading and unloading in sequence for maximum production.

Dunnage dimensions 12 x 1500-1200-400mm.

Large Tooling Wash

Specifically designed to wash large Rotary Broach Tools prior to re-setting, this machine design can be utilised for any large item. Reciprocating Wash and Drying Manifolds provide excellent wash and drying while providing easy access for assisted load and unload. Capacity 3000x1200x1220mm - 1000kg

Back to Washes List